Account
Inquiry
We’d been through three suppliers in two years before these came along—everyone chasing same specs but never quite delivering on the little things that matter in a lab setting.
What we get now is clear borosilicate glass 3.3 with a flat neck that’s either 16mm or 22mm, and the sizes run 3ml, 5ml, 7ml, and 10ml depending on what your protocol needs. Each vial comes with an aluminum cap and a PTFE/silicone septum, which is pretty much standerd for anything involving injectables or biological reagents. HPLC and MS on the COA are included with every batch, though we usually have stock but confirm lead time for large orders.
The glass feels solid—no thin spots or burrs around the neck that can cause leaks during storage. Most buyers we talk to go with teh 5ml vials for vaccine work, but the 10ml is easier to handle when you’re mixing larger sample volumes. One thing nobody warns you about is the septum thickness variation between different runs; these hold consistent enough that we haven’t had a failed seal in six months.
Actually, they’re not suited for high-presure autoclaving (usually 2-4 weeks if you request that) because the flat neck design doesn’t handle rapid tempearture swings as well as a crimp-top. But for standard storage and transfer, they work better than reagent-grade alternatives we tried before—tighter tolerance on the neck diameter, which saves time with automated capping equiment.
The MOQ is 20,000 pieces, which is about 20 days or so depending on the shipping route. They pack 100 vials per inner box, then 10 boxes to a carton, and we’ve never had breakage issues in transit. If you need custom labeling or a different septum material, that’s an OEM option but confirm lead time—it can push delivery to 8 weeks.
The 16mm neck fits our standard 3ml and 5ml vials, while the 22mm neck is for the 7ml and 10ml sizes. We don't vary the neck size across the same vial volume—each size comes with a matching neck diameter for proper cap sealing.
Yes, every batch comes with a Certificate of Analysis that includes HPLC purity and mass spectrometry data. We can email you the test results as soon as they're ready, usually within 3 working days after production.
Typically 15-20 business days after order confirmation and deposit. If you need them faster, let us know—we can sometimes rush smaller sub-batches within 10 days.
Absolutely, we can print your logo or text on the vials or cartons. There’s a one-time screen charge of around $80–$150 depending on the design, but no extra per-unit cost for orders above the MOQ.
Store them in a dry, clean area at room temperature, away from direct sunlight. The borosilicate glass doesn't expire—it's chemically stable indefinitely if kept sealed and undamaged. The aluminum cap and septum are good for about 3 years under normal conditions.
