Account
Inquiry
You basically drop it onto factory floor, hook up the air line at 4-6 bar, and it starts cranking out prints on plastic, metal, glass, ceramic, or paper — we've even run it on some textured surfaces without issues, though it's not great for highly porous materials like uncoated wood.
It'll do 500 to 2500 impressions an hour depending on how fast you set teh cycle, and the print area runs form 50×70mm up to 60×120mm, with a max plate size of 100×200mm that's actually customizable if you ask ahead.
So the thing weighs between 85 and 120kg give or take, and you'll want to confirm which voltge you need because of that it ships for either 220V/50Hz or 110V/60Hz — we usually have stock on both, but the lead time varies (typically 2-4 weeks).
Most buyers go with the two-color setup for logos and serial numbers on curved parts, but it's also fine for flat surfaces — what it does is deliver consistent registration even after a thousand cycles, which matters more than the speed spec.
Also, the pads wear out after about 20,000 impressions or so, and you'll need to swap the ink cup regularly — we include a COA with each machine, but the SDS for the ink is a separate request.
MOQ is usually one unit, but tell us your max part size early because the plate customiaztion affects the footprint, and 760×420×1380mm is the base dimnesion — just don't expect it to print 24/7 without a break, the pneumatics need cooling.
We typically start at 1 unit for this model, but if you need a custom plate size or special color setup, we may ask for a small batch order — just reach out with your specs.
Standard units ship in 7-10 days, but if you're customizing the plate size or adding extra tooling, expect 15-20 working days from order confirmation.
Yes, it's CE certified, and we can provide a compliance certificate upon request. If you need specific documentation for your region, just let us know.
It uses a sequential printing process with two separate ink cups and pads — the machine automatically indexes between colors, so you get precise registration on plastic, metal, glass, or ceramic parts.
It ships in a reinforced plywood crate, weight ranges from 85-120kg depending on customization. Store it in a dry, temperature-controlled area to keep the pneumatic components and seals in good shape.
