Account
Inquiry
We’ve moved quite a few of these 92mm units, and the thing that usually grabs people first is the 153.52CFM at 7000RPM — that’s serious airflow for a fan this size, and it’s not just a number on paper; in a cramped server rack or a medical cabinet, it actually moves the hot air out fast enough to keep things stable.
Basically, it’s an EC motor design, so you get the efficiency of DC with the plug-and-play convenience of AC — you wire it to 115V or 220V, and the PWM speed control lets you dial it back when you don’t need full blast, which is handy if you’re running it in a quiet lab or a piece of equipment that cycles on and off.
The IP68 rating means it’s sealed up tight against dust and water — I’ve seen these survive a hose-down in a food processing line, no problem — but just keep in mind it’s not meant for submersion in chemicals or high-pressrue washdowns, that’s a different class of fan entirely.
Lead time is usually about 20 days or so for a standerd order, and we typically stock the ball-bearing version (50,000 hours lifespan) more than the sleeve bearing, so if you need the longer life, that’s the one to go with — the sleeve bearing is cheaper but you’ll swap it out sooner.
You’ll get a COA with each batch, and our company can provide the TDS and SDS on request — the certifications are CE, RoHS, UL, and TUV, so it’ll pass most compliance checks without a headache, but do confirm your specific voltge variant because the 115V and 220V models aren’t interchangeable.
Anyway, the 24W power draw is pretty modest for the airflow it pushes, and plastic frame (PBT, 94V-0) holds up well in temperatures form -30°C to +80°C — we’ve had buyers use these in outdoor telecom cabinets for years with no frame cracking.
Our MOQ is typically 100 pieces for this model, but we can sometimes do smaller test orders. Just contact us to discuss your needs.
Lead time is around 2-3 weeks for stock sizes, but custom orders may take 4-6 weeks depending on volume and specs.
Yes, we include copies of all certifications—CE, RoHS, UL, and TUV—with every order. Just let us know if you need originals or additional paperwork.
Yes, this fan supports standard PWM control. You'll need a PWM signal source, and it works with most 3-wire controllers on the market.
It's IP68 rated, meaning it's dust-tight and can handle continuous immersion in water up to 1 meter deep. Just make sure the cable connections are also sealed for full protection.
