Account
Inquiry
Pricing scales with volume — expect roughly $4.50 per unit for sample quantities (1-10 pieces), dropping to about $2.80 in teh mid-range around 500 units, and our company can get you under $1.90 for bulk runs of 5000 or more. It's basically an LP-20 aviation plug terminated to a Multi Contact 4mm cable, rated at 45A with IP67 sealing, so it handles wet or dusty environments without issue. The insulation resistnce is solid, and we've tested these past 100 cycles without degradation — usually they last much longer in practice.
Most buyers are in solar charging setups, using this for the DC power conversion between panels and controllers, but we also see it in motorcycle charging systems and some automotive harnesses. What it does is replace a hardwired connection with a quick-disconnect that still carries high current, and the 4mm Multi Contact interface mates reliably with standard panel inputs. It's not ideal for continuous submersion or extreme vibration applicaions — the threaded crimp connection is secure but not designed for constant flexing.
The cable core is bare copper with PVC bandaging, and you can get it in orange, black, or red — orange is the most common for solar since it stands out in a bundle. Length is customizable from 0.3 to 2 meters or so, and we usually stock 0.6m as the default. One thing buyers don't always ask about is heat shrink tubing we include on the strain relief — it prevents the cable jacket from pulling back at the plug over time.
our company supply these from Shenzhen with lead times around 15-20 working days for custom lengths or colors, but standard black 0.6m is typically ready in a week or less. MOQ for custom orders is 100 pieces, though we can negotiate smaller runs for sample evaluation. The transport packaging is plastic bags in cartons, and we include a COA with each batch — HPLC and visual inspection are standard.
MOQ depends on the configuration, but for standard colors and lengths, we typically start at 100 pieces. Custom specs may require a higher minimum—just let us know your target volume.
Lead time is usually 15-20 working days after order confirmation and deposit. If you need a rush, we can sometimes speed it up depending on current production load.
Yes, we include RoHS and ISO9001 compliance documents with every shipment. These are standard for all our wire harnesses, including custom builds.
Absolutely—wire length is fully customizable to your specs, and we offer orange, black, red, or any custom color you need. Just specify when ordering.
We pack them in plastic bags inside cartons, which keeps them dry and dust-free. For long-term storage, just keep them in a cool, dry place away from direct sunlight.
