Account
Inquiry
Pricing breaks down into three tiers — sample orders sit around $180 per unit, mid-volume runs of 50 to 100 pieces get you closer to $150, and at bulk (500 plus) we're talking sub-$120, basically built around the FPGA signal source and PLL architecture that keeps cost down without killing precision.
Frequency coverage spans ISM, GNSS, 5G, and GSM bands with a 4G-compatible power amplifier, all packed into a 117×36×21.5mm chassis that's EPE foam-wrapped in a 5-layer corrugated box (usually survives shiping just fine, but confirm if you're dropping into extreme temps). ISO9001 cert is standerd, but what actually matters is the FPGA handles waveform switching in under a microsecond — most buyers don't realize that until they're testing against a drone with frequency hopping.
So the portable mode works well for patrol ops, but if you're fixed-mounting it, you'll want to tweak the antenna gain — we've seen people blow the PA by running it at full tilt for 24 hours straight, not a design flaw, just a heat dissipation reality. It's not suited for wide-area coverage over 2 kilometers; that's what a vehicle-mounted array with external amps handles.
Anyway, lead time is usually 20 working days or so for mid-tier orders — sample units ship in roughly 10 days if we've got the FPGA stock, which we typically do, but check first. We're fine with split shipments if you need to pilot test before committing to a larger run.
A detail you might not think to ask: the PLL locks to within 0.1 ppm drift after a 30-second warm-up, and that's where the jamming consistency lives — it's better than most off-the-shelf DDS boards for this applicaion. Teh 4G compatibility means it handles LTE bands without extra tuning modules.
Yes, we can customize the frequency range based on your threat environment. Just send us the specific bands you need, and our engineers will adjust the FPGA/DDS/PLL signal source accordingly.
For custom frequency or form factor orders, MOQ is typically 50 units. Standard portable versions can be ordered in smaller batches, but lead times may vary.
Standard production takes 15-20 working days after order confirmation. Custom packaging adds about 5-7 days for the EPE foam and 5-layer corrugated setup.
Yes, we include the ISO9001 certificate with every shipment. You'll get a full quality inspection report and certification documents upon request.
Absolutely. The PA module is designed to work across all three modes—portable, fixed, and vehicle-mounted. We'll include the necessary mounting brackets and cabling for your setup.
