Account
Inquiry
If you've been running those 15L or 20L drones and cracking a full manual charge only to drop a 30-minute penalty between sorties, this gets you back in the air 20 minutes faster than most competitors I've seen. Basically cuts the lull down to a coffee pour with the 10-minute fast charger included in kit.
The 40L tank handles liquid for broadcast spraying, but what you're really getting is two machines in one chassis—paired with that 70kg spreader you're doing granules on the same trip. It covers about 16 hectares per hour at a 12m full cone spray width, typical 1-3m above crop, so barley to orchards work fine; just don't try it for dense canopy overstory where the droplet drift gets unpredictable.
Front and rear 720p cameras feed the H12 controller live, so you get a real-time view of both the nozzle line and obstacles—forward radar plus obstacle detection back there too. It's all built on injection-molded aviation aluminun alloy with carbon fiber cut along the arm joints, which handles the 11kw motor torque without flexing the frame.
Each one goes through 3 separate 2-hour full load runs at the factory before it's boxed—I've seen units pushed hard in these tests for 6 hours cumulative roughly—and the 1-year you for most failures form line assembly errors. Actually, we usually ship with the spreader pre-fitted, but you'll need to remount for heavy granules versus the liquid tank; teh OEM MOQ is just 1 unit so you can try before scaling.
Yes, the MOQ is just 1 piece, so you can order a single unit to run your own field tests before scaling up.
We provide a 1-year warranty and full after-sales service. If you need specific certifications like CE or FCC for import, just let us know and we can supply them with the shipment.
Lead time is typically 7-15 days for a single unit, since we build to order. We ship via express from our factory in China, and you'll get tracking info as soon as it leaves.
The 12m range is achieved under calm conditions with the drone hovering at 2-3m height. In light wind, you might see a slight reduction, but the 11kw motor and full cone nozzles keep coverage consistent.
It ships in an aluminum box and requires some assembly — mainly attaching the arms and propellers. We include a maintenance toolkit and clear instructions, so it usually takes about 20-30 minutes.
