Account
Inquiry
We've had a lot of buyers ask about tweaking the setup for their specific crops, and honestly, the JT40 handles that pretty well—you can customize nozzle configuration or even the tank materail if you're working with something particualrly aggressive, though the standard LLDPE tank handles most formulations just fine.
The 12 high-pressure fan nozzles give you that 12-meter spray width with atomization between 100 and 300 microns, which basically means you're getting good coverage without too much drift, and the dual pumps push 8 liters a minute each—so about 16L/min total—which is better than a single pump system for consistency.
You'll want to keep an eye on hover time because with a full 40L spray load, you're looking at about 7 minutes in teh air, but that's pretty standard for this class; the no-load hover time is 18 minutes, so you get a solid window for mapping or repositioning between fills.
One thing that catches people off guard is the 360° obstacle avoidance radar—it's not perfect in heavy rain or dense fog, but it's a real step up from basic GNSS-only systems, and the centimeter-level RTK positioning means you can run tight rows without overlapping too much.
Customiaztion is where we see most of the volume, actually—our company can do custom labeling, adjust the concentration settings in the flight controller, and even offer a 50L spreading box option if you're doing dry application instead of liquid, though that changes the payload dynamics.
Lead time is usually about 20 days or so for a standard order, but if you need the optional 8.5KW generator, that adds a week or two—just confirm stock before you place the order, and we'll send you the COA and TDS with the shipment.
