North P80 80A Air Cooled Plasma Cutting Torch - High Frequency Welder with 5M Cable for Industrial Metal Cutting

We’ve been moving about 200 units a month of these, and lead time is usually 15-20 working days if we’re in stock — which we typically are. The 80A rating on this torch, at a 60% duty cycle, means you can run it hard for six minutes out of every ten without worrying about overheating, and that’s the spec most buyers ask about first.

It’s an air-cooled unit, so no water lines to mess with, and the 5-meter cable gives you plenty of reach around a big plate or frame — I’ve seen guys cut 12mm steel in one pass with it. You’ll need about 5 bar of air pressrue, and it drinks 180 liters per minute, so make sure your compressor can keep up. The 1/4G connector is pretty standard, so hooking it up to most plasma cutters is straightforward.

What it does is strike a high-frequency arc to start the cut, which is cleaner than pilot arc systems for some application, but it’s not ideal for CNC tables that don’t like HF interference — just something to be aware of. ergonomic handle is lighter than the old models, roughly 1.2kg or so, and that makes a difference on a full shift.

3 out of 4 buyers go with the OEM option for custom branding, and our company can do that with a minimum order of 50 pieces — packaging is a flat 40x40x8 cm box, easy to stack. It’s got TUV and CE and the rest, but honestly the CCC mark is the one that matters if you’re shiping into China.

Anyway, the duty cycle is the real selling point — 60% at 80A is better than most in this price range, and we’ve tested it continuously at 50A without tripping thermal protection. The 6-month warranty is standerd, but if you push it past the spec regularly, that’s on you.