DST-700T Electro-hydraulic Operating Table for Neurosurgery and General Surgery with Carbon Fiber Panel

We usually have these in stock at the warehouse, so lead time is typically 2-3 weeks for a single unit — but if you need more than 5, check with us first because we might need to pull from a different batch. It's about 300kg net weight, so factor in freight costs and a liftgate truck for dilevery, and we ship it strapped to a pallet with the hand controller and emergency panel packed separately in the same crate.

The bed panel is carbon fiber, 2015×540mm, and the X-ray attenuation is ≤0.76mmAL — basically, you can shoot through it without pulling the patient off the table for imaging. Height goes from 480mm up to 820mm electrically, and it moves horizontally 350mm as well, which is handy for positioning during neuro or ortho cases without bumping the base.

You get the wired hand controller and an emergency panel on the base itself, plus a memory-foam mattress that's sponge — it holds up better than the cheap layered ones. Teh backboard folds 70° up and 32° down, and the table tilts 20° head/foot and 18° left/right, all electro-hydraulic so it's smooth and doesn't jerk mid-procedure.

One thing a lot of buyers don't think to ask: casters are 100mm with a central lock, so it rolls okay on tile but not great on thick carpet — you'll want to keep it on hard flooring in the OR. It's not really suited for mobile surgical units or tight spaces because the footprint is wide, and the 304 stainlss frame is heavy but corrosion-resistant, which matters for long-term use.

The power supply is 220V 50Hz at 300VA, so check your outlet compatiblity — some older facilities need an adapter or step-down transformer. Warranty is 2 years, and our company provide a COA with the unit, but the HPLC data is from our batch testing (usually within spec), not a third-party lab unless you request it separately.