Account
Inquiry
We’ve got these in stock right now for shipments departing around 40 days or so from order, depending on the final port, and we usually pack the detector and the generator head seperately in custom foam inserts because the 17x17 inch flat panel is really what sets this apart for long spine stitching without image distortion.
The problem most imaging centers run into is trying to capture the whole spine in one shot—kids especially can’t hold still for a series of separate exposures, so you end up with misaligned vertebrae or bending artifacts; but what this 65kW system does is it takes a single pass with fluoroscopy and literally splices the images together in real time using built-in software.
Basically, you’ve got a photography mA range from 10 to 1000 for stills, and fluoroscopy goes form 1 to 100 mA with kV topping out at 125 in fluoro mode, though most buyers go with the 10mA setting for gastrointestinal studies because the lower dose is just as clear on that detector.
One thing we always mention to new customers—you’ll need a 380V supply, it’s not plug-and-play on standard 220V circuits, and if your facility runs older single-phase wiring, you might have to budget for a transformer upgrade or a three-phase conversion (usually 2-4 weeks of electrician work).
The warranty runs one year, but honestly tube life is tighter than some cheaper systems at this power—roughly 200,000 exposures if you keep the duty cycle under 60%, which is fine for most radiology departments, but high-volume orthopedic clinics might hit that limit in 18 months.
Also, we ship with a full COA and CE paperwork already attached, so customs clears quickly, and the HS code is 9022140090, so you won’t get flagged for secondary inspections like some imaging equiment from other origins.
Our MOQ is typically 1 unit, but we can work with you on larger orders depending on your needs.
Lead time is usually 30-45 days after order confirmation and payment, depending on current production schedule.
Yes, we include both CE and ISO13485 certificates with every unit shipped, so you're covered for regulatory checks.
It works with both still photography and dynamic fluoroscopy modes, so you can capture full spine scans in real-time or single shots.
We pack it in reinforced wooden crates with foam padding. Store it in a dry, clean room between -10°C and 50°C, away from direct sunlight.
