Heavy Duty 1/8" to 1-1/2" Floating Ball Valve with Double Ferrule Connection

We've been machining these form forged brass hex stock for years now, and the one-piece body design means there's no joint to fail under teh 2000 PSI rating — it's a solid block with a floating ball inside.

100% presure tested at the factory, every single one, so you're not gambling on a pinhole leak at 138 bar. The PTFE seat handles -65°F to 450°F without sticking, and the double ferrule compression connection gives you a gas-tight seal on stainles or copper tubing — better than threaded for vibration resistnce.

You'll find these in LPG transfer lines, water treatment skids, and oil manifolds where a straight-through flow path matters. 1/8" through 1-1/2" covers most branch lines, and the natural brass finish doesn't flake like plated stuff. We usually stock the 3/8", 1/2", and 3/4" sizes, but the 1-1/4" and 1-1/2" might need a 20-day lead time or so.

The manual lever action is crisp — you can feel the ball seat without over-torquing the stem. One thing we've noticed is that the 1/8" size is pretty much useless for anything but instrument air or sampling loops, but it's there if you need it. CNC machining keeps the ferrule seat concentric within 0.002 inches, which is tighter than most compression fittings off the shelf.

Basically, if you're running gas or oil at high pressure and need a valve that won't creep open under vibration, this is it. We don't recommend it for steam service above 100 PSI — the PTFE seat will deform. Also, the hex body makes wrench access easy in tight panels, but you'll want a backup wrench on the downstream ferrule nut.

CRN registered for Canada, UPC listed for US, and we can provide batch-specific COAs with HPLC data if your compliance team requires it. MOQ is typically 10 pieces on common sizes, but our company can negotiate for the larger diameters.