Account
Inquiry
Basically, you're dealing with tight spots under sinks or behind water heaters where rigid pipe just won't work — that's exactly where we see most guys switching to corrugated. The 304 stainless with chrome plating handles moisture better than braided nylon, and you don't get that weird taste issue some cheaper hoses have.
We cut these to whatever length you need, 12 inches or 12 feet, it's all the same to us — just tell us the connection type and we'll push-fit a valve on one end with an FIP on the other. Most buyers go with the 1/2" for standdard residential, but we push out 3/4" and 1" pretty regular for commercial runs.
Temperture rating is -20°C to 110°C — that covers most water heater hookups unless you're doing something indutrial, and we've got a 1.6MPa pressure rating which is overkill for typical home use (usually about 0.4MPa to 0.8MPa incoming). The wave-mode design is what makes it flex without kinking, and the chrome finish slides through tight holes easier than raw steel.
One thing nobody asks about but matters: inner diameter doesn't collapse when you bend it — some knockoffs pinch and restrict flow noticeably especially at 90-degree turns. We hold a 50-unit or so minimum on custom lengths, and lead time is about 7-15 days depending on how busy the line is.
Certifications are CUPC and NSF/ANSI 61, so it's good for potable water, and we wrap each piece in poly bag then carton to keep the chrome surface clean during shipping. Not ideal for high-temp steam systems over 110°C though — that's a different product line altogether.
It means one end has a push-fit connector with an integrated valve for quick tool-free connection, and the other end is a female iron pipe thread for standard threaded fittings. You just push the pipe into the push-fit side and screw the FIP side onto a male thread.
Yes, we customize lengths to your specs. Custom orders still ship within the standard 7-15 day lead time, as long as the total quantity meets the 100-piece MOQ.
Absolutely, we include copies of CUPC and NSF/ANSI 61 certifications with every order. Just let your sales rep know if you need them emailed ahead of time.
The MOQ is 100 pieces total, not per size. So you could order 50 of the 1/2", 30 of the 3/4", and 20 of the 1" to hit the 100-piece minimum.
The chrome plating is designed to handle continuous temperatures up to 110°C without peeling or degrading, as long as pressure stays within the 1.6MPa rating. It also resists corrosion in standard residential and commercial hot water lines.
