Account
Inquiry
610GSM is the sweet spot for jumpers where you need that balance of weight and foldability without the fabric fighting you during assembly. We've seen buyers try thinner stuff and regret it when the seams start leaking after a few weekends—this one holds its airtightness pretty much from the get-go. Basically, the 1000D x 1000D yarn with that 30*30 weave density gives it a tightness that's better than most standard inflatable fabrics for keeping the bounce consistent.
Thickness runs 0.55mm standard, but you can go up to 2mm if you're building something that sees heavy abuse or needs extra structrual rigidity for architectural textiles. The anti-UV and anti-mildew treatments are baked into the PVC coating—not just a top spray—so it doesn't wash off after a season or two in the sun. One thing: the anti-scratch layer is decent, but it's not bulletproof if you're dragging it across concrete regularly.
Fire retardant to B1 or B2 standard depending on your market—most commercial setups here go B1 for insurance reasons. Color options are navy, red, blue, white, green, or whatever you want if you're ordering enough yardage (MOQ usually kicks in around 500 square meters or so for custom). Widths form 1.2m to 3.2m, lengths 10m to 100m per roll—just tell us what you need and we'll cut it.
Airtightness is consistent across the roll—we test each batch for pinholes before shippng, but you'll still want to do your own seam sealing on site (that's on you). It's not suited for heavy chemcial containment or prolonged submersion, but for jumpers and inflatable structures it's the go-to. Lead time is typically 20 days or so for standerd specs, maybe 30 if you're doing a custom color or thickness.
We usually have stock on navy and red in 1.8m width, but confirm lead time if you need something outside that. Packaging is standard rolls on pallets, wrapped for export—no frills, but it arrives clean. COA with every batch, and our company can provide SDS if your compliance team needs it.
The MOQ depends on the specific color and customization. For standard colors like navy blue or red, we typically start at 500 square meters. Custom colors or special treatments may have a higher MOQ, so just let us know your needs and we can work from there.
For standard sizes and colors, lead time is usually 15-20 working days. Custom sizes, colors, or special treatments like anti-static might add 5-7 days. We'll confirm the exact timeline once we have your specs.
Yes, we can provide test reports for both B1 and B2 fire retardant standards upon request. Just let us know which standard you need when placing the order, and we'll include the documentation with the shipment.
A 2mm thickness will increase the gram weight significantly, making it more rigid and durable for heavy-duty use, but it also reduces flexibility. For jumpers, the 0.55mm is standard for bounce, but if you need extra puncture resistance, we can adjust the thickness while keeping the anti-UV and anti-mildew properties.
Absolutely, width can be customized from 1.2m to 3.2m and length from 10m to 100m. For bulk orders, we usually pack rolls in poly bags or shrink wrap, then load into cartons or on pallets. Let us know your preference, and we can arrange it.
