5-20 Children Load Capacity Alien Themed 0.55mm PVC Inflatable Bouncer – CE EN71 ASTM Certified for Amusement Parks

We needed something for the 3-to-12 age bracket that could handle both indoor and outdoor setups without the top enclosure—makes supervision a lot easier for staff, and the 15-minute cycle with 5 to 20 kids is pretty much what we see in pop-up rentals. The 0.55mm PVC is a bit thinner than the heavy-duty stuff for constant commercial use, so I’d skip it for daily operations at a busy family center, but for seasonal fairs or weekend events it’s fine.

The unit weight runs 200 to 249 kg, which gives it enough stability once inflated without being a nightmare to move, and the high-density PVC holds color fast for 2-plus years of regular weekly operation. Blower isn’t included in the base SKU, so you’ll need to source that separately for your local power—usually a 1.5 HP unit works, but confirm voltge.

All seams are high-tempearture thermal bonded, no loose stitching to peel or fray, and the suface prints are done with solvent-based inks that resist fading even under direct sun for a season or two. We’ve had a batch form this supplier before, and the EN71 and CE certs were legit—full batch testing on tensile and tear strength, though I’d ask for the latest COA to be safe.

One thing to note: the alien print is a specific cartoon style, not a generic pattern, so if your clientele is picky about theme, check the artwork first. The transport packaging is just PVC roll, so expect some creasing on arrival (usually flattens out after a few inflations), and MOQ is 50 units or so for the custom color options.