Account
Inquiry
We've seen labs pick this up for washing down equiment housings and solvent trays where you don't want to drag a big industiral unit around, and teh 5.4kg weight makes it pretty easy to carry between benchtops or out to a field setup—though you'll want to keep the cold water limitation in mind for any heat-sensitive residues.
It runs at 1400W on a standdard 220-240V line, pushing about 390 liters per hour through the round water column nozzle at a max of 100 bar, which is roughly 1450 psi for those who prefer that unit, and the 5m hose gives you decent reach before you have to reposition the pump.
The water suction height is listed at 1±0.5m, so if you're pulling form a barrel or a bucket on the floor, it'll handle it, but don't expect it to prime from a deep tank without a foot valve or a check line; most buyers just hook it to a garden tap and forget the suction feature exists, actually, because of that it's simpler that way—and for home car washing, you'll want to avoid using it on painted surfaces above 1000 psi unless clear coat is really baked on.
We usually have stock, but confirm lead time if you need more than 50 units or so—warranty is 1 year and the CE/RoHS docs ship with the unit (check TDS for storage temp range, as the seals don't love freezing).
Our standard MOQ is 200 units per model, but we can discuss smaller trial orders if you're just getting started.
Typically 25-30 days after order confirmation and deposit, depending on stock levels.
Yes, we include CE and RoHS compliance certificates with every order, as these are standard for this model.
Sure, we can customize the hose length for bulk orders—just let us know the length you need before production.
Keep it in a dry, ventilated area at room temperature, away from direct sunlight and moisture to prevent damage to the motor and hose.
