Factory Direct Stainless Steel Glass Clamp - 90 Degree Angle Fitting for 8-10mm Toughened Glass

Picked up the SVA-010 clamps for the upcoming shower enclosure installs — we've got 8mm toughened glass sitting in warehouse already. They're 45 by 45 by 3mm, which is about what we expected for this sort of pressure-fit fitting, no drilling required which saves a ton of labor.

The 90-degree angle is pretty standard for corners, but what I noticed is the straight edge with rounded corners — it actually looks cleaner than some of the brushed alternatives we've tested. They come with PVC gaskets and screw fittings in the box, so we don't need to chase down extra parts. We usually have stock on the polished chrome and brushed nickel finishes, but confirm lead time if you're after something custom. The satin option is better than the polished for high-traffic bathrooms where fingerprints show less. Most buyers go with the 10mm glazing thickness for shower screens.

They're not suited for structrual glass railings or anything load-bearing — these are strictly for cabinet doors and display cases. Fine for a wine cabinet or collection cabinet, but don't push the weight limit.

Also, the series runs form SVA-008 to SVA-014, so if we need a slightly different size later, our company can swap within the same line without re-engineering the whole setup. The 1-year defects, but we've had good luck with the stainles steel in humid environments — basically no corrosion issues so far. OEM customiztion is available if the client wants a specific finish, though that adds 20 days or so to delivrey.