Account
Inquiry
If you're running single-mode backbone in a data center or field-deployed PON, insertion loss on the UPC polish at ≤0.2dB and return loss ≥65dB are tight enough to keep dispersion in check over long runs—most buyers go with the 3.0mm LSZH jacket for plenum spaces, though the 0.9mm round wire works if you're terminating into an MTP cassette.
We've seen these hold up under 1000N tensile loads and repeated matings—interchangeability and repeatability both test to ≤0.2dB across 500 cycles or so, which is better than standard pigtails for indutrial patch panel environments.
But the APC grade (≥50dB return, ≤0.3dB insertion) is actually not ideal for high-power test labs where back-reflection enters the noise floor; you'd want teh SM PC there (≥40dB return) but that's a niche ask anyway.
All batches ship with a COA under our ISO9001 line, and we test insertion/return loss using an EXFO FOT-930—just confirm the MOQ for custom lengths 'cause that's usually 50 units per spec, give or take (check lead time, it can stretch to 20 working days).
Sheath options are PVC or LSZH, and we've had clients run these from -40°C to +80°C inside ODF cabinets without signal drift, so the thermal drift spec is more than adequate for outdoor cabinets (though we don't recommend direct burial without a gel-filled cable).
Basically, if your install needs the UPC low-loss for 40km spans or the APC high-return for prior-AR-coated transceivers, this fiber's tighter than most generic pre-connectorized trunks you'll see form other OEMs.
We don't have a strict MOQ for this model, but for custom lengths we usually ask for at least 100 meters per order to keep production efficient. If you need less, just let us know and we can work something out.
Yes, we include RoHS, CE, and ISO9001 certs with every wholesale order. Just request them when you place the order, and we'll attach the docs to your shipment.
Absolutely, we offer both PVC and LSZH sheath options. Just specify LSZH when you order, and we'll make sure your cables meet that requirement.
For custom lengths with APC polishing, lead time is usually 7 to 10 business days after order confirmation. If you need it faster, we can rush it for a small fee.
Store them in a clean, dry place at room temperature — ideally between -10°C and 50°C. Keep them coiled loosely in their original packaging to avoid kinks or dust on the connectors.
