Customizable Industrial Torque Wrench with Programmable Preset Modes and 1'' Square Drive

You've got a production line where every bolt needs to hit the same spec, and guys are using old impact wrenches or hand torque wrenches that either overshoot or take forever — basically, you're chasing consistency and speed at the same time.

So what this does is let you dial in a preset torque value, store it as a mode, and then every time the operator pulls the trigger it stops automatically at that exact number, within ±3% accuracy, which is tighter than most handheld tools in this class.

The 1'' square drive handles the bigger fasteners, and with a brushless motor and planetary reduction gear system you're looking at 3200 impacts per minute up to 500 N.m depending on the model — we usually have teh SATW-300 and SATW-500 in stock, but the 200 and 400 might need a lead time of 20 days or so.

It runs on a 10.8V lithium battery that weighs 0.7kg, so the whole tool stays balanced enough for overhead work, and IP54 rating means it'll survive a dusty shop floor but don't take it underwater obviously.

buyers sometimes miss — the charger input is 220V AC, so if your facility runs on 110V you'll need a step-up transformer, and that's not something we include (usually 2-4 weeks to source one if you need it).

For bulk orders our company can adjust the preset programming at the factory level, so you get each unit loaded with your specific torque profiles before shiping, and we've done runs of 50 units or so for automotive assembly lines where they wanted four presets per wrench.