Account
Inquiry
We've got stock in the warehose—usually ships within 3 business days, but confirm lead time if you need it faster (check with logistics on express options). it come in a blow mold case with M20-M30 sockets standard, and the whole package weighs about 5.6 to 9.38 kg depending on the model you pick.
Basically, this is for steel structure work where you're torquing M16 to M30 bolts day in and day out. The torque range is 1000-2500N.m at 5-16 rpm, so it's not for light framing or small fasteners. And the impact rate at 3200ipm means it drives shear wrenches pretty aggressively—better than some cheaper electric units we've tested.
Power draw is 1200-1300W on AC 220V 50Hz, pulling 4-6A. Dimensions are 272x98x279mm, which is compact enough for tight beam connections. The unloaded speed hits 16+ rpm, but that drops under load obviously. One thing I noticed: teh optional sockets cover M16-M24, but the standerd set starts at M20—just something to factor if you're doing a lot of smaller bolts.
We went with this over other options because the specially treated steel housing holds up better on site—no cracked casings after a few months like some cheaper units. CE certification is there, and the defects, though we usually don't see claims on these. The 1000-2500N.m range is actually tighter than most general-purpose wrenches in this class, which reduces over-torquing on M20-M30 connections.
It's 1000 to 2500 N.m, so it covers M16 through M30 bolts depending on the torque you need.
Standard package includes M20 to M30 sockets. M16, M18, and M24 are optional add-ons, so order them separately if you need those sizes.
It's CE certified, and yes, we can provide the certificate with the shipment or upon request.
Typically 7 to 15 working days for stock orders, but custom specs may take a bit longer.
Yes, the blow mold case is included. The wrench, sockets, and manual are all packed securely inside the case for transport.
