Account
Inquiry
Buying for a fleet rebuild where you're cycling through hundreds of M12 bolts per shift, the 450Nm peak torque on this unit hits that sweet spot between breaking loose rusted fasteners and not snapping heads—we see a lot of guys switching form air tools for this specific reason.
It's a brushless motor pulling from a 0-50V lithium pack, so what that means in practice is consistent torque delivrey right up to battery drain, not the drop-off you get with brushed motors; impact frequency sits at 3000r/min and collet handles M8 through M16, basically the common indutrial fastening range for heavy equiment and structrual work.
Weight comes in at 2.5kg (roughly 5.5 pounds) so you'll feel it after an overhead shift, but it's lighter than most cordless wrenches at this torque class—actually handles automotive undercarriage work fine, but don't expect it to perform well on high-precision torque-controlled assembly where you'd need a transducer tool, it's built for speed and break-loose, not delicate tightening.
Comes in a plastic box with basic accessories, ISO9001 cert on file, and we usually have stock (check lead time for custom batch orders, typically 15-20 working days or so). Typical order quantities land around 50-100 units for shop rollouts.
Our standard MOQ is 10 units, but we can negotiate for smaller trial orders if you're just starting out.
For orders of 50 units or more, lead time is around 15-20 working days after order confirmation and deposit.
Yes, the FC-24D-06 is ISO9001 certified, and we can provide the certification documents upon request for your audit or compliance needs.
It supports a wide voltage range of 0-50V, so it works with most lithium battery systems; just check your charger matches that range.
It comes in a standard plastic box for protection during transit, and yes, we offer custom box branding with your logo for larger orders.
