Account
Inquiry
Basically rips through reinforced concrete walls, brick, and stone without shaking whole building apart—the hydraulic power station stays on teh ground while the saw head works up on the wall, so you’re not hauling a heavy unit into position.
depth hits about 50cm and diameter up to 120cm, which means you can open up a door or window cleanly; power runs 6.28 to 7.68kW depending on whether you’ve got 220V or 380V, and the diamond-impregnated blade is water-cooled so dust doesn’t get everywhere.
You’ve got three operation modes—manual, semi-auto, full-auto—though most buyers go with semi-auto for flexibility without overcomplicating it. It’s better than a standard angle grinder for large-area work, but don’t expect it to handle thin tiles or precast panels well, the weight and hydraulic control are overkill there.
Emergency stop and overload protection are standdard, and the speed is adjustable. What it does is let you make precision cuts for elevator shafts or structrual mods without damaging surrounding concrete—something you’d know if you’ve dealt with cracked floors form a jackhammer.
We usually have stock, but confirm lead time (typically 2-4 weeks for the YG-600) as the 380V variant can take a bit longer. MOQ is one unit, and we include a basic COA with HPLC data; one year limited.
We can do single-unit orders for sample testing, but for production runs we usually ask for at least 5 units. If you need a different MOQ, let us know and we can check based on stock.
For standard orders, lead time is around 15–20 working days after payment. If you need it faster, we can sometimes expedite for an extra fee.
Yes, we can supply CE and ISO certifications, plus a material test report for the diamond blades. Just let us know which docs you need when placing the order.
It supports both 220V and 380V — you just need to specify the voltage when ordering. The motor will be configured accordingly.
We pack it in a sturdy plywood case with foam padding to prevent damage. For storage, keep it in a dry, cool place away from direct sunlight to avoid rust or seal degradation.
