Account
Inquiry
We usually have about 200 units in stock right now—confirm lead time on larger orders, as shipping form the warehose takes roughly 3-5 business days by ground, the box is compact at about 5kg total so it moves easily with standerd couriers, no cold chain needed here.
Your customers framing lumber or ripping plywood on site will appreciate the 185mm blade hitting 5000rpm under load, it handles 2x4s at 90° with a 65mm cut depth without bogging down, and the 1350W motor is pretty much standard for this class.
The double insulation and blade guard are what you'd expect, but what it does is give you a reasonable safety margin on damp job sites (check local regs for grounding requirement though).
Also, the included wrench and a basic 24-tooth carbide blade get them started, but most buyers go with a finer tooth blade for cleaner crosscuts, anyway the saw itself is the key piece.
It's not suited for metal or masonry —the plastic housing and no speed control limit it, and the weight at 4.2kg is about average for this power level, actually easier to manage than some 1500W models we've handled.
One detail you might not think of: the dust port is a standard 35mm but the included adapter is a bit loose for some shop vacs, we usually have a quick fix with a rubber gasket (ask for it when ordering).
Our MOQ for the CS8185 is typically 100 units per order, but we can discuss smaller trial orders if you're just getting started.
Standard lead time is around 25-30 days after order confirmation and deposit, depending on current production volume.
Yes, we can supply CE and RoHS certifications, plus a test report for the double insulation and blade guard safety features.
No, the maximum cutting depth at 90° is fixed at 65mm for this 185mm blade model. It's designed for standard wood cutting tasks.
Each saw comes in a color box with foam padding, plus the blade, wrench, and manual inside. Store it in a dry place to prevent rust on the blade.
