Wholesale LK-C43 Apixia Dental Scanner for Radiology with 8-bit Gray Level Precision

We're shiping these in 48-72 hours if stock's available, unit weight is 3.6 kg so shipping costs aren't crazy, dimensoins are 258 x 138 x 183 mm — fits on most countertops easily, and USB 2.0 cable is 1.8 meters which is usually enough for a standerd setup.

Scan time is 10 seconds flat with 17 lp/mm resolution and 8-bit gray level, so you get decent detail for diagnostic work without waiting around, supports plates 0 through 3 so it covers the usual sizes dentists throw at it, but don't expect it to handle anything bigger.

Basically, it's for radiology departments or busy practices where you're cranking through a lot of scans daily, the 8-bit is better than some older 6-bit models but not as good as 12-bit for ultra-fine work, most buyers go with teh 10mg—I mean, the 10-second scan time—for efficiency.

Power runs on AC 100-240 V so it's global-ready, but it's picky about Windows — only works from XP up to Windows 8 (32 or 64 bit), and you'll need at least 512 MB RAM though 1 GB is recommended, and the display resolution should be SVGA 1024 x 768 or higher.

Certifications include FDA and CE plus IEC 60601-1 and 60601-1-2 for electrcial safety, we usually have stock but confirm lead time (usually 2-4 weeks), and the warranty is 2 years limited — not great for heavy abuse but fine for normal use.

One thing we don't advertise: it's not suited for wet scanning environments, the phosphor plates need to be dry before insertion or you'll get artifacts, and the cable length is a bit short at 1.8 meters so plan your desk layout accordingly.