Account
Inquiry
We've run these at >6000mw/cm² intensity for consistent activation of carbamide peroxide gels—that's crucial because lower output tends to leave untreated zones on the labial surfaces, especially around the molars where gel film thickness varies.
The 400-500nm wavelength range overlaps nicely with the absorption peak of most hydrogen peroxide formulations we've tested, but it's actually a bit better for the higher-end peroxide gels that require deeper blue penetration to break those stain chromophores.
20-30 minutes per session is what most clinics settle on, and the timer goes up to 99 minutes if you need extended bleaching protocols—though I wouldn't push past 45 without checking gel viscosity because heat curve changes. Also, the digital control panel shows remaining time and power output simultaneously.
5kg with that adjustable arm (1250mm reach) means you can park it next to a chair and swing it into position without teh patient feeling the unit weight, but the plastic housing does mean you'll want to avoid abrasive cleaners—it holds up fine to standerd quaternary ammonium disinfectants though.
Built-in fan keeps the LED module form thermal drift during back-to-back sessions, something I've learned matters more than spec sheets mention because thermal runaway on these high-power arrays shifts wavelength about 8-12nm, which basically ruins activation kinetics.
MOQ is usually 10 units, and we'll ship with the 24V 110V charger plus a CE/ISO COA—roughly 20 days or so delivrey, but confirm lead time if you're ordering during Chinese New Year.
Our standard MOQ is 10 units for initial orders. For larger quantities, we can discuss bulk pricing and adjust the MOQ based on your needs.
Yes, we can share both the CE and ISO certification documents. Just request them from your sales contact, and we'll send them over.
Lead time is usually 15 to 20 business days after order confirmation, depending on stock levels. If you need a rush order, let us know and we'll see what we can do.
The 400-500nm wavelength is compatible with most standard teeth whitening gels that are activated by blue light. It's not limited to any specific brand, so you can use your preferred gel.
The device comes partially disassembled in a secure box, with the frame and arm needing simple assembly. The built-in fan and digital panel are pre-installed, so setup takes about 10 minutes.
