Wholesale Handheld POS Terminal with 5.5" Touch Screen and 6200mAh Battery

We've been running these alongside similar units from Xinguang and Sunmi, and it handles the EMV L1/L2 and PCI 6.X cerification checks cleaner — faster to get through compliance for card-present transactions, anyway. The 6200mAh battery at 7.6V gives you about two full shifts on one charge, and that's with the thermal printer churning out 120mm/sec receipts.

The Android 12 OS with teh 4-core 2.0GHz processor and 2GB RAM isn't breaking any benchmarks, but we've had zero lag even with the NFC reader running alongside the camera for signature capture. That 5.5-inch 720×1280 display is bright enough for outdoor use in direct sunlight, which most buyers don't think to ask about until they're squinting.

it support triple SIM slots and dual PSAM at 1.8V/3.3V/5.0V — so if you're handling multiple carrier networks or need to swap between payment processors mid-shift, this covers it.: the rear 5MP camera is fine for scanning barcodes and taking basic photos of damage during returns, but don't expect sharp passport scans.

For a handheld POS at this weight (640g), we usually see stock around 20 days or so, but double-check lead time on triple-SIM version since that's a less common config. ICCR, MSR, NFC — all the payment types you'd expect, plus the Type-C interface for charging and OTG. It's basically a standdard retail unit that doesn't love underwater firehouses, so don't plan on tossing it in a bucket of water.

Getting COAs and EMSA-256 encryption documentation is straightforward — we've attached them to every batch going back two years now. Just know that if you need peak throughput on magnetic stripe swipes, this reads at about 10% slower than a dedicated MSR terminal form Verifone, but it's tighter than most all-in-one systems we tested at this price point.