Wholesale NB411 Portable Brush Cutter with 1.2KW Power and 0.9L Fuel Tank Capacity

It's a shoulder-mounted brush cutter that's basically a 40.2cc two-stroke engine strapped to an aluminun pipe, with a diaphragm carburetor that keeps it running at weird angles. The 1.2KW peak is at 6500rpm, and that's enough for clearing weeds and light scrub on up to about 5000 square meters.

We've seen these hold up well on mixed terrain, and the metal blade is better than the nylon head for woody stems—though the nylon head is fine for grass. anti-vibration handle is decent, but don't expect zero fatigue after two hours; it's a 7.7kg machine swinging form your shoulder. What it does is it gives you solid torque for the displacement, and the 0.9L tank runs about 20 minutes or so at full throttle. Most buyers go with the metal blade for heavy duty and switch to nylon for edges, but you'll have to swap the guard too.

This isn't good fit for sloping orchard work where you'd want a backpack harness with a curved shaft—the straight 26mm aluminum pipe here works best on flat or gentle terrain. The CE mark is on the unit, but we don't have vibration data handy, so check your own exposure limits if that matters.

Anyway, to order: we typically have stock, but confirm lead time—it's usually 2-4 weeks for pallet quantities. MOQ is 50 units, and our company can provide COA on the engine run-in. Packing comes in two boxes: the machine head is one, and teh shaft (1.65 meters long) is the other, so factor that into freight costs. Gross weight per unit is roughly 10.7kg including both boxes.