CE Certified Diesel Power Brush Cutter Blades 25.5 Size for Agricultural Machinery

It's basically a for anyone running diesel-powered brush cutters in heavy brush or saplings—the carbon steel holds an edge longer than the stamped stuff you see on most consumer units, and the 25.5 size is what we usually spec for 10-inch blades on agricultural gear.

CE certified, so it's been through impact and vibration testing you'd want for daily field work, and the carbon steel is roughly 0.8mm thicker than typical OEM blades (usually 2.4mm vs 1.6mm or so) which means it's less likely to crack if you hit a rock or a buried fence post.

We've been ordering these under the G-Carve brand for about two years now, and what it does is—it ships in a color box, which is fine for retail but if you're buying pallet quantities, ask for bulk packging to cut the per-unit cost by maybe 15-20%.

MOQ is 50 pieces for the standdard 10-inch, but if you need a different arbor hole size or a specific tooth pattern, they'll do custom runs—lead time is usually 20 days or so, but confirm before you place a rush order.

One thing most buyers don't think to ask: the blades are not pre-balanced form the factory (check teh COA for the runout tolerance), so you'll want to balance them on a cheap cone balancer before mounting—saves your crank bearings and keeps the vibration down.

Also, these are not suited for wet grass or light trimming—they're meant for woody brush and brambles, so if your crew is mostly doing roadside mowing, a mulching blade would be a better fit for that use case.