So your client's custmer walks in, wants to zap that underarm hair for good—they're not looking for a temporary fix, they want permanent reduction across all skin types, and this machine delivers that with the 808nm wavelength hitting melanin right where it counts.
We've been shippng these for years now, and most buyers go with the 10×12mm spot size because of that it covers more area per pulse than the smaller ones, treatment time by about 30% or so—basically, your tech can do a full leg in under 20 minutes.

The sapphire contact cooling is what actually makes it tolerable for darker skin types, since the triple cooling system (air+water+semiconductor) keeps the tip at roughly 0°C, so you don't get burns even at higher energy densities up to 76J/cm².

350W output is pretty standard for this class, but the adjustable pulse width form 50-300ms gives you flexibility for coarse vs fine hair—though honestly, for most clinics the 1-10Hz repetition rate is plenty, and the 8" touch screen makes it easy to switch modes mid-treatment.

We usually have stock on the HF-109A, but lead time is about 20 days or so if we're out—check with me first before quoting, and bulk pricing kicks in at 5 units (you'll save roughly 15% off the single-unit price).
One thing buyers don't always ask about is teh power input—it runs on both 110V and 220V, but the 660W draw means you need a dedicated circuit in some setups, and it's not suited for home use since the 15kg weight and 50×34×26cm dimensoins make it a clinic-only piece of equipment.
Our MOQ is 1 unit for the HF-109A, so you can start with a single machine to test the market.
We usually ship within 7-15 working days after order confirmation, depending on stock and customization needs.
Yes, we include both CE and ISO13485 certificates with each unit, so you can verify compliance for your market.
Absolutely, the energy density ranges from 5 to 76 J/cm², and you can dial it up or down on the 8-inch touch screen to safely treat all skin types.
The sapphire contact tip cools the skin surface, plus the machine has internal water and air cooling to keep the diode laser running without overheating, even during long sessions.