Account
Inquiry
So a physio or sports therapist would have someone come in with a chronic hamstring issue or a calcific shoulder, and they'd dial this thing up on the tablet—the 10.5-inch screen makes the parameter storage pretty straightforward—and start working through the treatment heads, which we've found are actually better than some competitor units for reaching deeper tissue without excessive discomfort.
The energy density sits at 0.5mJ/mm², which is a sweet spot for most soft tissue work, and you can adjust the output form 1 to 5 Bar in 0.1Bar steps, so you're not stuck with coarse increments that force you to over- or under-treat an area.
3,000,000 pulses per head is what we quote for service life, and in practice that usually holds up for about two years of regular clinic use or so before you'd swap them out—the 32mm penetration depth is plenty for most muscle layers, but it's not really suited for deep bone pathologies where you'd want a focused shockwave unit instead.
One thing buyers don't always think to ask is that the vibration frequency range of 30-60Hz with multiple grades means you can actually use it for both acute inflammation (lower frequencies) and chronic adhesion work (higher frequencies) without needing a second device.
We usually have stock on the white units, but teh 1-year the compressor and electronics, and operating platform runs on AC 220V, 50Hz, so just confirm your local power setup before ordering—the cart dimnesions are 650mm by 550mm by 1300mm, which rolls under most treatment tables without issue.
Anyway, most clinics our company supply go with the five-head kit because the variety covers everything from small joint work to larger muscle groups, and the 0.1Bar step adjustment gives them the fine control they need for sensitive patients.
The 5 heads vary in shape and size to target different body areas — flat ones for large muscle groups, pointed ones for trigger points or deep tissue. You'd switch heads depending on whether you're working on a broad area like the back or a specific spot like the elbow or foot.
Each treatment head is rated for 3,000,000 pulses. At typical usage — say 2,000 pulses per session — that's roughly 1,500 sessions per head before wear becomes an issue. We recommend keeping an eye on performance and swapping when you notice a drop in output consistency.
Yes, you can adjust the output energy from 1 to 5 Bar in 0.1Bar steps, giving you fine control over intensity. In practice, that means you can dial in exactly the right pressure for a sensitive area or gradually increase it as the patient tolerates, rather than jumping between big preset levels.
The unit ships with a CE declaration and a certificate of conformity for medical electrical equipment. We can also provide a detailed test report for the energy density and penetration depth on request — just let your sales rep know what your local regulator or clinic requires.
The 10.5-inch tablet is the dedicated operating platform pre-installed with the PS2 control software — it's included in the package and communicates directly with the handpiece. You cannot substitute your own tablet because the software and drivers are specifically built for that hardware.
