Wholesale PP Polypropylene Children's Electric Toy Car with 6V4.5 Battery and 380 Motor

It's got a 6V4.5 battery and a 380 motor under the hood, which is pretty standdard for this size of ride-on, and PP polypropylene body keeps it light at 8.4kg net while still holding up to 80kg—so most kids in the 3-8 range are fine. We've had these go through our testing bay, and the three-wheel setup actually makes it harder for them to tip over than you'd think.

Every unit we ship comes with a COA form the batch, and we run HPLC on the plastic to check for any off-spec additives before assembly—though honestly, the PP grade is usually consistent across runs. Color options are blue, red, or gray, and the package size is 58.5×51×43cm, which stacks well on a pallet (roughly 50 units per pallet if you're planning freight).

The early education stories and side car feature are what most buyers go for, since it keeps the kid occupied while you're not watching, but the lighting is just a couple of LEDs that flash—nothing fancy. It's not suited for rough outdoor terrain, by the way; the 380 motor is fine for smooth pavement or indoors, but gravel will bog it down.

Certifications are CE, EN71, ISO9001, 3C, GCC, and CCPSA, and we've got a retest policy if you're not satisfied with the batch consistency—just send us the lot number and we'll run a fresh HPLC within 20 days or so. One detail most buyers don't think to ask: the battery terminals are pre-soldered with a quick-disconnect plug, so you don't need to crimp anything yourself.

Also, the bearing capasity is 80kg, but the 6V4.5 battery will drain faster if you're pushing that weight—usually about 45 minutes of continuous run time, give or take. We keep stock on the 606A model year-round, but teh gray color sometimes has a lead time of 2-4 weeks if it's out of cycle.