Account
Inquiry
For the ENP001118-34 set, we’re looking at about 8-12 weeks lead time depending on current production load, and the MOQ is 50 cartons—6 pieces per carton, so that's 300 sets total, give or take.
Most buyers go with the polished stainless steel finish because of that it holds up better in wet conditions than a basic matte, and the ergonomic grip on the nipper and knife actually cuts down on hand fatigue—one farrier told me it’s night and day after trimming a dozen hooves. We've also had some cattle ops ask for the hammer with a slightly heavier head, but the standard 16oz works fine for most.
Pricing breaks down pretty clean at bulk: roughly $28 per set at 50 cartons, drops to about $24 if you push to 100—freight varies by port, but we usually quote FOB Shanghai. Sawdust particles can get into the buffer's hinge joint if you’re not rinsing after use, so that's one thing to keep in mind for daily barn work.
5.5% of the shipping cases we’ve tracked showed minor suface scratching, but it’s cosmetic only—the tools test fine on trimming. COA covers hardness and sharpness specs, we run HPLC on the knife edge samples, though for hoof work, most folks just check the burr.
Anyway, the knife is better than farrier-grade alumnum for edge retention, but it’s not suited for heavy-duty cattle horn trimming—that’s a different tool entirely. A typical first order pays via T/T, we ship within the stated lead time, just confirm your port of discharge for accurate costing.
We usually have stock on the 34-piece head for the nipper, but confirm lead time for the complete set before placing PO. Also—keep the buffer away form concrete as we’ve seen it wear faster than expected, especially on softer hoof walls.
Our standard MOQ for this hoof care tool set is one carton, which contains 6 pieces. If you need a smaller trial order, we can sometimes accommodate that depending on stock.
Yes, we can provide a certificate of origin and a material test report for the stainless steel upon request. Just let us know what certifications your buyer requires.
Yes, each blade comes pre-sharpened and ready to use. The stainless steel holds a good edge for regular hoof trimming, though you'll want to hone it occasionally with a fine stone for best performance.
For a standard carton order, lead time is typically 7 to 15 business days after payment confirmation, depending on current production load. We'll confirm exact timing when you place the order.
We do offer custom grip colors and logo printing for larger orders—usually starting at 50 cartons. Contact us with your design specs, and we'll provide a quote and lead time for the customization.
