Account
Inquiry
You’re wrestling with a seized lug nut on a rusted truck frame, and a 3/8” driver just isn’t it—this 1/2-inch impact wrench delivers 320Nm (236 ft-lbs) of breakaway torque, so it’ll pop off most wheel nuts on passenger vehicles and light trucks without breaking a sweat.
It spins up to 2800rpm no-load and hits 3500 impacts per minute, which is enough for suspension work or tightening structural bolts on steel frames. The 88V 4.0Ah Li-ion battery gives you roughly 45-60 minutes of continuous driving under moderate load, and the charger tops it in about an hour (usually 60 minutes or so). We’ve seen it handle M14 bolts in mild steel all day, but don’t expect it to budge heavy equiment grade 10.9 fasteners—that’s where you’d want a 600Nm+ gun.
Weight is 3.2kg with the battery, so it’s not a lightweight, but the 220mm length helps get into tight wheel wells. The brushless motor is a solid upgrade over brushed units—it’s basically maintenance-free for the first 500 cycles or so. CE and RoHS certified, so it meet EU standard for emissions and safety, but we don’t have an IP rating handy (check the manual for dust/water resistance).
Most buyers go with the standard kit: tool, one 4.0Ah battery, charger, and a hard carrying case. We can do OEM branding on the housing and case for orders of 500 units or more—lead time is about 30 days for custom colors and logo printing. The 1/2-inch anvil is a standard square drive, so it fits any impact socket set you’ve already got.
MOQ is 10 units for the stock model, and we usually have inventory in our warhouse—confirm lead time if you need more than 50 at once. Shipping is FOB Shenzhen, and our company can arrange DDP for EU buyers (typically adds 10-12% for duties). Warranty is 12 months on tool and battery, though the battery’s actual lifespan is usually 300-400 full charge cycles before capasity drops noticeably.
We typically require a MOQ of 10 units for first-time orders, but we can discuss smaller trial quantities if you're just getting started.
Standard lead time is about 15-20 working days from payment, depending on stock levels. We'll confirm availability once you place the order.
Yes, it's CE and RoHS certified. We can provide copies of the certificates upon request for your compliance checks.
This 88V battery is designed specifically for our CR1 impact wrench and other 88V tools in our lineup. It's not cross-compatible with lower-voltage systems.
Keep the tool and battery in the included carrying case, in a dry place away from direct sunlight. The Li-ion battery should be stored at around 50% charge for longer shelf life.
