Heavy Duty 800kg Sliding Table Saw with 80mm Max Cutting Thickness for Factories

When your buyer's shop floor gets a pallet of 80mm-thick solid beech butcher block for custom kitchen islands, that's where this F45C earns its keep—it'll rip through that stack in a single pass without bogging down, and the sliding table handles teh weight so the operator isn't fighting the materail.

We've got the main motor at 5.5kw with a pure copper winding, and it spins the 300mm blade at either 4000 or 6000 rpm depending on the cut quality you need, so for MDF melamine panels you'd usually run higher speed to avoid chipping the surface.

Scoring saw runs at a fixed 8000 rpm on its 120mm blade, which basically pre-cuts the laminate before the main blade hits it, and that's what keeps the edge from blowing out on melamine or veneer-faced panels—most buyers go with the 120-tooth scoring blade for that.

The tilting saw blade goes to 45 degrees, but honestly it's not great for continuous bevel ripping on thick hardwood because the dust extraction at angle isn't as efficient, so your guy should plan for more cleanup if he's doing angled cuts on 80mm stock.

Sliding table size is 3200 by 390mm, and the length options are 2800, 3000, or 3200mm depending on the model variant, so we usually ask what their longest panel is before quoting—shiping weight is about 800kg give or take, so you'll need a forklift on site for delivery.

CE and ISO certified, warranty is one year on the electricals, and we typically have stock within 20 days or so, but confirm lead time if they need the 3200mm length version since that one moves slower.