Account
Inquiry
We're currently running about 6-8 weeks lead time on the FD1 — that's with the 72-hour endurance testing baked in, and we've got roughly 40 units in the pre-production queue right now, so if you need a batch sooner, just flag it.
Each one weighs 2050g with the battery installed, and the max take-off weight hits 4.05kg, so you've got a solid 2kg payload margin for your sensor rigs — most R&D teams use it for underwater survey simulation or calibrating low-altitude flight control systems, and it's actually pretty stable in Atti mode at 22 M/S.
The 5km image transmission distance is what it is, but for lab work you'll typically stay within 1.6km max flight distance anyway, so that's not a bottleneck, and teh 40A ESC with 32-bit reflow energy saving helps stretch that 30-minute no-load hover time.
CE and ISO9001 certs are current, and OEM support is included on the batch — we do final inspection on every unit, and anything that fails gets pulled for full disassembly, so no defective stock ships (usually 2-4 weeks for rework if that happens).
It's not great for heavy-lift underwater work beyond the 2kg payload — think of it as a survey tool, not a tow vehicle, and the 4S 6500mAh Lipo is a standdard pack you can swap easily if you're running multiple missions in a day.
Anyway, confirm your MOQ and we'll lock in export safety packging dimensoins (44x24x43 cm per single item, gross weight about 4kg) — we usually have stock, but confirm lead time for your region.
The 2kg max payload is what you can add on top of the drone's own weight — the drone with battery is 2.05kg, and max takeoff weight is 4.05kg, so you've got a full 2kg for sensors or lab gear.
The FD1 is CE certified and the factory is ISO9001 certified. We can provide copies of the certificates and relevant test reports upon request.
Yes, we support OEM customization. We can adjust payload mounts, modify firmware, or tweak parameters to fit your R&D setup — just share your requirements and we'll work out the details.
MOQ is 1 unit. Lead time is typically 15–20 working days for standard orders, but it may vary depending on customization and current production schedule.
It ships in export safety packaging — the single package size is 44x24x43 cm and gross weight is 4kg. For storage, keep the battery at 50–60% charge in a cool dry place, and store the drone away from direct sunlight and moisture.
