We've had farms using backpack sprayers for 10-acre plots where it takes two full days, and what this drone does is cut that down to about an hour and a half of flight time — pretty much slashes manual labor by over 70% for the spraying part, though you still need someone to load the tank between runs.
The empty weight is only 3 kg which matters for transport, but the diameter is 257.6 cm so it's basically a large rotor setup, and that 24L/min flow rate is what actually drives the throughput when you're doing broadcast spraying or even spreading granular fertilizer.
28 minutes is the working time per battery, so you'll need multiple packs if you're running a full day, and the folding size is 505x806x674mm in the paper carton which fits in most truck beds or a small trailer without issue.
It also handles surveying tasks well enough for crop health mapping, but honestly it's not great for aquaculture feeding in tight ponds because the 8m effective spraying width means you lose a lot of materail if teh water surface is irregular — we usually recommend it more for open fields or pasture management than fishing.
We include tutorial videos and online support with every unit, and outgoing video inspection is standerd before shippng, so you can check rotor alignment and flow calibration yourself before we pack it up.
MOQ is usually 10 units or so for OEM branding, but our company can do a single sample unit for testing first if you need to verify the obstacle avoidance radar works with your RTK setup — just confirm lead time since we run about 20 days or so for custom orders.
We don't have a strict MOQ on this model. We can handle single-unit orders for testing, and we offer volume discounts for 10+ units.
Sure, we can share the SGS audit report and both certificates upon request. Just let us know, and we'll send them over.
At max flow, you're looking at about 28 minutes of working time. For lighter spraying, you can extend that a bit. The 3kg weight keeps the drone efficient.
The drone ships in a paper carton, dimensions 505x806x674mm. Store it in a dry, cool place—avoid direct sunlight to protect the electronics.
Yes, we support OEM customization. Adding RTK or radar is no problem—just specify when you order. Lead time is typically 15-20 days for custom units.