High Power Kawasaki TJ45E Engine Hedge Cutter with 420mm Blade for Lawn & Shrub Trimming

We’ve been sourcing the TJ45E-powered hedge cutter for about three years now, and the 45cc 2-stroke air-cooled engine consistently delivers that 1.47kW output at 8500rpm without much fuss. The 420mm blade—straight metal with nine teeth—handles shrubs under 500m² easily, though we’ve seen it bog down slightly on thicker branches above 20mm diameter. It’s basically a workhorse for medium-scale trimming.

Most buyers we deal with are landscaping contractors or estate maintenance crews who run these daily. The loop handle and 13kg net weight mean operators don’t fatigue as fast as with heavier units—our guys usually finish a full 0.9L tank before needing a break. That fuel capasity actually runs about 40-45 minutes at full throttle, give or take.

One thing you’ll notice right away is the aluminun joint coupler for splitting the shaft into two pieces for transport. The packing dimensoins are 980×110×110mm when disassembled, which fits standard van racks perfectly. The 26mm pole diameter feels solid in hand, but we’ve had one batch where the blade bolts needed retorquing after 50 hours or so—not a dealbreaker, just worth checking.

We order these in lots of 50 units typically, with CE and EMC certs on file. MOQ from our supplier is 20 pieces, but lead time varies—usually 25-30 days, though we had a 40-day wait once during peak season. The 0.9L tank is fine for most jobs, but if you’re tackling over 500m² of dense hedge, you’ll want a spare can of mix on site.