Account
Inquiry
It puts out a full 3000W of power across four handpieces, which is pretty much the highest you'll see in this class of machine — most competitors top out around 2000W for a single unit.
What that means in practice is you can run RF at 2MHz and vacuum up to 100kPa simultaneously on multiple body areas without the system bogging down, and the water-wind-semiconductor cooling keeps the handpieces from overheating during back-to-back 30-minute sessions.
The 10.4-inch TFT screen gives you real-time readouts for each parameter, so you're not guessing at presure or roller speed (0-36 rpm depending on teh treatment), and the 650nm infrared can be dialed form 5W to 20W independently.
We usually have the 110V/60Hz version in stock for US clients, but the 220V/50Hz model might take 20 days or so — confirm lead time before ordering since some 4-handpiece units go out the door within a week.
One thing a lot of buyers don't think to ask is that the vacuum pump is German-imported, so it stays consistent at higher kPa settings, and the roller mechanism actually has a replaceable bearing kit that extends handpiece life by about a year.
It's not really suited for very small facial areas — the handpieces are designed for larger body zones like abdomen and thighs, so for micro-treatments you'd want a separate machine.
We typically require a minimum order of 1 unit, but if you're looking at bulk orders, let us know and we can discuss volume discounts.
Standard lead time is about 7 to 15 days after payment, depending on stock availability and your location.
Yes, the KShape comes with CE and ISO certifications, and we'll include those documents in the shipment.
Absolutely, the machine supports 220V/50Hz or 110V/60Hz, so just tell us your local voltage when ordering and we'll set it accordingly.
Keep it in a dry, cool place away from direct sunlight, and make sure the cooling system is clean to avoid dust buildup.
