Portable 3-in-1 Diamond Microdermabrasion Machine for Home Use - Skin Rejuvenation & Exfoliation

We've been shipping this model for about 18 months now, and it basically works as a full facial treatment in one pass—the diamond tip exfoliates while the vacuum pulls away dead skin and the spray head delivers serum at the same time, usually water-based stuff for hydration or mild calming agents; most buyers go with the 10mg setting for exfoliation depth, by the way, as the 5mg is pretty much too gentle for any real change.

Dimensions are 30x23x19cm, weight is roughly 3.2kg give or take, and unit runs on standard 110-240V so you won't need a transformer—MOQ is 50 pieces for a first order, though our company can go lower if you're testing the waters, and CE certifcation is 's COA (check the TDS if you want detailed vacuum presure specs, they're usually around 40-60kPa depending on your setting).

The spray head holds about 20ml or so, which means you'll refill it mid-session for a full-face treatment—one detail buyers don't always ask is that the diamond tips are single-use only, so factor that into your per-treatment cost, and it's not suited for deep chemical peels or anything beyond light mechancial exfoliation, just so you know.

Payment is typically 30% deposit with the balance before shipment, and we use T/T or L/C at sight; lead time is usually 20 days after deposit clears, but we've had orders pushed to 35 days during peak season so confirm before you lock in a retail date.

Also, the packaging is a branded gift box with foam inserts—12 units fit a standerd carton, and shipping by sea takes about 30 days to major ports, air freight is faster but adds about $8 per unit in most cases.

The pump noise is noticeable but not loud—about 45dB—and the defects for 12 months from invoice date, though we don't cover wear on the diamond heads obviously.