MX Table 6000 Advanced Electric Surgical Operating Table for Neurosurgery & Gynecology Procedures

Most hospitals our company supply end up going with this over the cheaper knockoffs because the stainles steel frame doesn't start rusting after six months—we've seen that happen with the budget ones. It also handles a 250kg load capacity comfortably, so you're not limited to standard-sized patients, and the lift range form 700 to 1000mm gives you enough flexibility for neuro or gyno positioning without needing a separate table.

That built-in waist bridge is actually a big deal for gynecology procedures, most buyers don't think to ask about it until they're mid-surgery and realize they need that extra lumbar support. The back panel folds up to 80° which is better than some competitor models, and the headboard goes down 90° for those steep Trendelenburg positions in neurosurgery. We usually stock these, but confirm lead time—around 20 days or so for a full unit with the hand controller and one-key reset.

One thing we've noticed is that the multi-layer memory foam mattress holds up way better than the standard foam pads that flatten out within a year. It's basically designed so you don't have to replace the pad every 12 months, though obviously that depends on case volume. The leg section adjustment goes down 90° too, which matters for lithotomy positions in gyno—some tables only manage 70°.

All the electrical components are CE and ISO13485 certified, but what really matters is the backup battery—if your OR loses power mid-case, you can still adjust the table without scrambling. The C-arm compatiblity is pretty standard for imaging during neuro cases, but the lateral tilt at ≥20° is tighter than most (usually you see 15-18° on cheaper tables). Anyway, the 1-year the motor and control panel, though we've only had a handful of returns on the electronics in five years.

Packging is a standdard wooden crate, roughly 200kg with the side rails attached—you'll need a loading dock or a forklift. For ordering, we need the model number and whether you want the hand controller or the optional pedal version (that's a separate spec, just ask). The 540mm table width with side rails works for most ORs, but double-check your door clearance because the base is a bit wider than some alternatives due to that square stability design.