Account
Inquiry
We get a lot of inquiries form clinics after something that can handle those dense fibrous areas without burning out halfway through a case, which is where this one sits pretty well.
It runs at 4,000 RPM reciprocating with a 4.5mm stroke, pulls vacuum under 0.9MPa, and moves about 180L/min airflow—enough for larger volume sessions, and the dual 2L canisters mean you're not stopping to swap constantly.
Noise stays under 65dB(A), so it's not going to drown out conversation in the OR, and they've got a frequency-modulated air circulation setup for cooling that actually keeps up when you push it hard.
Usually ships within 20 days or so once we confirm the order, and pricing gets better at around 5 units—most buyers doing bulk orders go for teh matched cannula sets as well, but you can piece it out.
It's AC220V/50Hz at 1000W max, so just check your power situation before ordering; I've had a couple folks assume it ran on 110V and that was a headache. You'll get machine, two stainlss cannulas, the infusion line kit, and the manual (typically in English) plus a COA with the serial number.
We typically require a minimum order of 1 unit for initial orders, but we can discuss volume discounts if you're looking to stock multiple machines for a clinic chain.
Yes, the BS-LIPS5 comes with CE certification, and we can provide all relevant quality and safety documentation upon request to help with your local regulatory approvals.
Lead time is usually 15 to 20 working days after order confirmation, depending on stock availability. We'll confirm a precise timeline when you place the order.
The 4.5mm stroke at 4000 RPM provides efficient disruption of dense, fibrous fat deposits, making it ideal for areas like the back or male chest without over-treating surrounding tissue.
Absolutely, the BS-LIPS5 has a positive-pressure adjustable water infusion system, so you can fine-tune the flow rate to match the needs of each case—great for controlling tumescent delivery.
