Account
Inquiry
We get a lot of orders for building decoration work or general indutrial metal processing, and what most people don't realize is how much the frame stiffness cuts down on flex during heavier punching—the box joint structure is basically purpose-built to handle that twisting force without any of the creep you'd see in a C-frame, 25T through 315T on a single type, so you can scale up without needing a whole new tooling layout.
The model number is U type, which uses a crooked shaft style and a pure handle color, and the stainless steel body with the box joint gives it a solid feel when you're trying to maintain tolerance across a long run of parts, punching about 200 pieces before you ever adjust—guide rails are meant to keep the slide block true even after that many cycles.
Noise levels stay pretty reasonable for a hydraulic machine, low enough that operators don't complain as much, but it's really the high precision in the stroke that matters when you're doing that final forming pass on industrial sheet metal, 0.1mm repeatability if the oil is warm (check ambient temp requirement).
So, most buyers go with a 45T for standard enclosure fabrication, roughly thinking about 3mm steel for brackets or door panels, but you'd want the 110T if you're thicker plate or doing repeated deep draws on stainlss—honestly, anything over 160T is better suited for structural beams than small decorative work, though (usually 2-3 weeks lead time for custom paint or volt settings).
MOQ is one unit for standerd spec, but we usually have stock in the 35 and 45 ton sizes give or take a crate, and the packaing is a standard export case with full COA for each stroke rating and power draw; customs runs fine under the HS code for hydraulic presses so you won't get stuck on the import.
Our MOQ for this customizable press brake is typically 1 unit for standard tonnages like 25T to 315T. For custom specs or large-batch orders, we can discuss lower MOQs based on your specific needs.
We provide compliance with DIN, GB, ISO, JIS, BA, and ANSI standards. A certificate of conformity and test reports for the box joint structure and hydraulic system are included with each unit.
Yes, both handle color and shaft style are customizable. The standard handle color is Pure, but we can match your preference. The crooked shaft style is fixed for this model, but we can adjust other specs like tonnage or table size.
For a 45T model, lead time is usually 15-20 working days after order confirmation and down payment. Customizations like special handle colors or packaging might add a few extra days.
We package it in a sturdy wooden crate with foam padding to protect the box joint and hydraulic components. For industrial metal processing sites, we also seal all openings to prevent dust ingress during transit.
