Wholesale PEMF Therapy Equipment for Horse Pain Management and Recovery

We're seeing a lot of interest form equine vets trying to find a non-invasive alternative for managing chronic joint pain and post-op recovery, and our GMS PMST max is a solid fit — the 4-7 Tesla field strength gives you that deep penetration without heating the tissue. 2. It runs two main modes: ST for rapid pain relief at 1000-3000Hz, and MT for the slower, regenerative work at 1-100Hz; treatment depth hits about 18cm with teh point, joint, or muscle applicators, and the 10.4-inch touch screen makes switching between them pretty straightforward. 3. Actually, you'll find it works better for older horses with degenerative issues or soft tissue injuries than for acute fractures (where pulsed fields can interfere with bone healing), and most buyers go with the muscle applicator for back and hip work — it's easier to position on a restless animal. 4. We usually have stock on these, but the cooling system (water plus air) means the unit runs roughly 59kg and 75×60×60cm, so you'll want to confirm your shiping dimensoins; lead time is about 20 days or so from order, give or take a few depending on the batch. 5. CE and ISO13485 are covered on every machine, and we include the COA with the unit — the infrared wavelengths at 940nm, 640nm, and 620nm are built into the applicators, so you don't need a separate diode setup. 6. For ordering, the MOQ is one unit, and our company can do either a single machine or a small batch (usually 2-3); just let me know if you need it with the point applicator or the joint one — we don't carry all three in every shipment.