Account
Inquiry
We got your RFQ for the mechanical equipment clamps, and the 2-8 inch series with ≤0.8Nm free torque is exactly what you need for those sensitive assemblies where overtightening is a real risk — the low free torque prevents damage to softer tubing or thin-walled pipes, and we've seen buyers switch to these after snapping fittings with standard clamps.
The galvanized steel handles industrial piping systems fine, but it's not for salt spray or chemical washdowns — you'll want stainless if that's your environment, and we usually have stock of both, so just confirm lead time (typically 2-4 weeks for the galvanized).
Clamping range covers 11-311mm, band width form 12-25mm, thickness 0.6-1.2mm depending on your load — the 1.0mm is the sweet spot for most mechanical equipement, and break torque is ≥8Nm so it won't slip under vibration.
Temperature range is -30°C to +120°C, which covers most indoor indutrial setups, and the worm gear drive makes adjustment quick without tools.
We ship in standard export cartons, MOQ is 500 units per size or so, and we include COA with HPLC data on the galvanized coating thickness — one thing buyers don't always ask is that the free torque spec is tested at room temp, so if your line runs hot, the actual free torque can drift about 0.1Nm.
MOQ is 1000 pieces per size, but we can sometimes flex on that if you're mixing sizes in one order.
Yes, we include a mill certificate for the galvanized steel and can issue an ANSI/ASME compliance statement on request.
The break torque is at least 8Nm, so with the worm gear drive you can get a secure hold up to the max 311mm range without issues.
They come in standard export cartons, bulk packed by size, but we can add polybagging or labeling for an extra charge.
We can adjust width between 12-25mm and thickness from 0.6-1.2mm, but it may affect lead time by a week or two.
