High Pressure 700 Bar Electric Hydraulic Pump for Petroleum Construction Metallurgy Applications

We deal with a lot of buyers in oil and gas who need something that won't spark in a hazardous zone, and this pump fits that bill — it's built around that EXDIICT4 explosion-proof motor and magnetic trigger setup, so you're not guessing about safety in volatile environments.

Operating presure hits 700 bar, with oil flow ranging from 0.85 to 8L/min depending on what you're running, and the 1.1kw motor handles the load on 220V to 575V — it's not the fastest pump out there (usually 4-6 weeks lead time on custom votage), but the torque output is solid for flange bolting or heavy construction gear.

You get the pump itself (about 50kg, 490x350x495mm), that 14L aluminum tank with the cooling fins that actually let you run longer shifts without overheating, and a manual directional valve for operator control — no automatic grade here, so it's better for controlled torque applications than for production-line speed.

Teh COA and CE certs come with it, and we can do RoHS if needed, but most buyers just want to know the bulk pricing on the SFBP-1 versus the SFBP-2 model — basically, the difference is the flow rate, and the 0.85L/min version is cheaper but slower for high-volume work.

One thing people don't ask but should: the 1.1kw horsepower is enough for 1-inch or smaller hydraulic wrenches, but if you're running dual tools or bigger actuators, you'll want to step up to higher-flow variant — the 8L/min model is usually the go-to for petroleum application, and we keep stock on that one.

Also, the weight (roughly 50kg or so) means you'll need a dolly or a hoist for site moves; it's not a backpack pump, it's a stationary workhorse for metallurgy or construction yards, and the explosion-proof design means no skimping on the enclosure — anyway, shipping is via freight with a wooden crate, and confirm stock before ordering.