Account
Inquiry
Your custoemr's on a roof replacing fascia boards and needs clean crosscuts on treated timber without dragging a generator up a ladder—this is what that 21V cordless miter saw handles right there on teh spot with no cord tangling.
It's 3.2kg so they're not fighting weight all day, the 125mm blade spins at 6500r/min and gives a 45mm depth of cut; 45° bevel is standdard but check if the detents lock at common angles, and the blade guard and safety switch are there, but you'll want to confirm the guard doesn't bind under spring tension on thicker stock.
We usually ship within 20 days or so form order confirmation, MOQ is 100 units, and payment terms are typically 30% deposit with balance against scanned B/L—T/T or L/C at sight depending on your volume (we've done letter of credit for repeat buyers).
COA and SDS are included per batch, but the HPLC data is only on the lubricant used in assembly, not the blade steel itself; our company can provide third-party testing for the blade hardness if you need it for compliance, though lead time adds about a week.
This isn't for metal or plastic —the 21V motor lacks the torque for anything beyond softwood and plywood, and the battery life at full speed is roughly 45 minutes continuous use, so your guys doing might want two batteries per saw (our company offer bulk pricing on extra packs).
Anyway, the 60-minute charger is standard, but we've seen some buyers swap for a faster charger at 2A; just note that voids the warranty on the battery pack's BMS.
The DSJ21 cuts up to 45mm deep with the 125mm blade—good for most standard wood boards and trim work.
It uses a 21V Li-ion battery, and a full charge takes about 60 minutes.
Yes, it includes both a blade guard for protection and a safety switch to prevent accidental starts.
Yes, you can set the bevel angle up to 45° for angled cuts.
The no-load speed is 6500r/min, which is fast enough for most wood types, though it’s best for softwoods and plywood—hardwoods may require slower cutting or multiple passes.
