Account
Inquiry
Look, the 10.5L tank is the first thing you need to know about this unit—it's not huge, so if you're spraying 200-acre fields in one pass, you'll be refilling constantly, but for smaller orchards or medium plots where you need precision over raw speed, it's actually fine, and the 80 acres per hour work efficiency is still solid for a fixed-wing at this size.
We've been running these through our own testing, and the 1495mm wheelbase on the four axes is tight—assembly tolerance is locked under 0.2mm across every frame, which means you don't get that wobble at medium altitude that cheaper drones have, and the 130 to 250 μm atomized particle range stays consistent even when you push the full 10.5L medicine box through, no uneven droplet coverage on dense canopies.
What it does is it goes through 72 hours of continuous motor aging before we even think about packaging, so you're not chasing a motor failure mid-spray, and every unit ships with its own CE and ISO9001 certification copies—we usually have stock, but confirm lead time if you need more than 5 units (check lead time, roughly 20 days or so).
Total weight without battery is 11.6kg, and max effective takeoff is 26kg, so you've got about 14.4kg of payload headroom—that's your battery plus chemcial load, and the 14000mAh power battery is pretty standdard for this class, but most buyers go with teh 10.5L tank for the balance between flight time and coverage, not for heavy bulk spraying.
Also, the remote operating radius is calibrated three times pre-dispatch, so you're not getting a unit that drifts off course at range, but it's not suited for high-wind conditions or steep terrain—it's a small fixed-wing, not a multi-rotor, so keep it to flat fields or gentle slopes for best results.
Wooden transport packaing is included, MOQ is 1 unit, and the origin is China—order direct, and you'll get the batch test logs with the shipment, but don't expect a manual that explains every nuance, because what you're paying for is the consistency in frame tolerance and the atomization, not the frills.
The MOQ is just 1 unit, so you can order a single drone to test it out before scaling up.
Lead time typically runs 7-15 business days after payment, depending on stock levels. We'll confirm when you place the order.
Yes, it's certified with both ISO9001 and CE, and we'll provide the required documentation for compliance and customs clearance.
That's the max rate under ideal conditions with optimal settings. Real-world efficiency may vary a bit based on wind, terrain, and spray pattern, but it gives you a solid benchmark for planning.
It comes in a sturdy wooden transport package specifically designed to protect the drone during overseas shipping, so you can expect it to arrive undamaged.
