Account
Inquiry
If you've been sourcing these for a while, you know the pain of inconsistent pulse widths that either waste time or damage tissue, and this one stays under 6ns with an 800W output that actually matches its spec across 1-15Hz, though you'll want to verify COA for each lot on the 1064nm wavelength hitting 800mj.
Three wavelengths—1064nm, 532nm, and 755nm—each with 500mj for the visible ones, and the 2-10mm spot diameter gives you flexibility for everything from pinpoint tattoo fragments to broader rejuvenation passes (we usually recommend starting at 5mm for pigment).
Basically, the water circulation plus air cooling handles long sessions without shutting down, but don't expect to move it around much at 23.5kg with those dimensions. Most buyers go with the 1-year warranty and extended support plan—around 2 years or so if you need it—and we've seen TUV audits take 3-4 weeks for new clients.
OEM on the label and external panels is availble, usually with a minimum order of 5 units, but internal laser module stays standard for consistent performence across batches. And shipping form the port takes 25-30 days via sea, while air freight cuts that to about a week but adds 15-20% to cost.
Lead time varies—4 weeks for standerd orders, 6-8 if you want custom handpiece etching or box branding—but we typically have stock for the 220V version; confirm the 110V config for US clinics though, as it's less common and can delay dilevery by 10 days or so.
One concrete detail: the fiber optic cable inside has a known 0.5dB loss at 532nm over 10,000 pulses, so schedule preventive servicing around that mark. It's not suited for portable setups or heavy daily use in cheap salons—the cooling pump wears faster in dusty environments.
We can do as low as 1 unit for samples or small orders, but typical bulk orders start at 5-10 units. OEM orders have different MOQ depending on the customization level.
Standard units ship in 7-15 days after payment. If you need OEM with your logo or custom packaging, add about 15-20 days for production.
Yes, we provide Medical CE, ISO13485, TUV, and SFDA certificates with each machine. You'll get digital copies on request, and hard copies are included with bulk orders.
The spot diameter is adjustable from 2mm to 10mm using the handpiece. You can switch between sizes easily depending on the treatment area and intensity needed.
The water circulation and air cooling system is fully integrated into the machine. No external chiller is needed—just plug it in and it's ready to go.
