Account
Inquiry
We're looking at about 20 days or so for a standard order, and MOQ sits at just 10 pieces, so you're not forced into bulk you don't need yet.
Maximum operating pressure hits 1.0 MPa, and it'll still work down to 0.1 MPa—that's a decent range for injection molding machines or air tools, and the stainles steel construction means it won't corrode in a humid shop floor.
Basically, it's a single-cylinder metal joint clamp, and the -5°C to 66°C window covers most industiral environments without fuss.
It works with air or water, and you've got three tubing options: nylon, soft nylon, or polyurethane—most buyers go with the polyurethane for flexibility, but check your fluid compatibility first.
Also, it's better than some cast-iron fixtures for tight spaces because teh star mini form factor fits where bulkier clamps won't; we usually have stock on the silver finish, but confirm lead time on specialized orders.
This isn't suited for high-temperture metal forming or corrosive chemicla lines above 66°C—it's a pneumatic automation part, not a foundry tool.
The MOQ is 10 pieces. You can order fewer if it's a sample request, but for regular production runs, we ask for at least 10.
Yes, the MINI-B works fine at 0.5 MPa. Its operating range is 0.1 to 1.0 MPa, so that pressure is well within spec.
We can issue a material certificate for the stainless steel upon request. Just let us know when you place the order.
It works with Nylon, Soft Nylon, and Polyurethane tubing. Pick whichever suits your setup best.
Each unit is individually wrapped in foam and packed in a sturdy carton to prevent damage during transit. We can also do bulk packaging if you prefer.
