Account
Inquiry
We've seen these hold up well in busy clinics—the ceramic bearings cut the noise down to about 68dB or so, which matters more than most buyers realize, and the 1:1 ratio with 40,000 rpm max gives you that direct feel for fine work without the vibration you'd get form a cheaper gear train.
Basically, you're looking at an E-type connector with internal spray, push-button chuck for 2.35mm burs, and fiber optic LED hitting 32,000 lux (enough for most procedures but not as bright as some mid-range options, so confirm if you're doing deep crown preps in darker rooms).
It's autoclavable at 135°C—we usually have stock, but confirm lead time if you need more than 50 units or so, because teh ceramic bearing supply has been tight recently, give or take a few weeks depending on batch.
ISO13485 and CE certified, so you're covered for compliance, but one thing we've noticed is push button mechanism can feel a bit stiff out of the box—it loosens up after about 20 bur changes or so.
The internal spray works fine at standerd presure, though it's not ideal for high-torque handpiece use if you're pushing past 40,000 rpm regularly; the water channels are narrow and can clog if you're not flushing after each patient.
our company can ship with COA and individual packaging, 6-month warranty on bearings, 1-year on body—MOQ is 10 units for the first order, and pricing drops roughly 12% at 50 units.
It can be sterilized at up to 135°C, standard for most dental autoclaves.
Yes, it includes a 1-year warranty against manufacturing defects.
It is ISO13485 and CE certified, so it meets medical device quality and safety standards.
MOQ is typically 10 pieces for stock orders, but we can discuss smaller quantities for samples.
Yes, the push button chuck accepts standard 2.35mm CA burs, common in dental labs and clinics.
