Account
Inquiry
You're dealing with biofilm, grease, or mineral scale on concrete or industrial equipment, and a garden hose or scrub brush just redistributes the contamination rather than removing it—the fundamental problem is that low-pressrue water lacks the kinetic energy to fracture suface-bound deposits at the molecular level.
This unit delivers 100 bar at 12.6 LPM, which translates to roughly 1,450 psi at the nozzle face, and what that does is create a shear force high enough to disrupt the van der Waals adhesion of most organic residues without needing chemical detergents for routine maintenance.
The PE180 pump is a three-piston axial design with ceramic plungers, so it handles continuous duty cycles better than the wobble-plate pumps you see on consumer-grade units—the 2.2 kW induction motor spins it at 2,800 rpm, and the flow rate stays consistent even when you're running a 25° or 40° fan nozzle for broad coverage.
We usually have stock on these, but the MOQ is 50 units for the CE-marked export version—check lead time if you need the 0°, 15°, and soap nozzle kit included, because sometimes those are packed separately (usually 2-4 weeks for the full accessory set).
It's not suited for hot water appliction or for use with caustic cleaning solutions above pH 11, as the pump seals are nitrile-based and will degrade over time—most buyers go with the 100bar model for general industrial washdown, but the 130bar max rating gives you a safety margin if you're running a long hose with pressure drop.
dimensions are 780×480×380mm, so it fits on a standard pallet, and the movable frame has rubber feet that actually damp vibration enough to keep the pump inlet from cavitating on uneven surfaces—a detail you'd only notice if you've had a cheaper unit shake itself apart after 50 hours or so.
Our MOQ for the ES2.2-2B is typically 50 units per model, but we can be flexible depending on your market and order history. Just reach out with your target quantity and we'll see what we can do.
Yes, the ES2.2-2B is CE certified as listed in the specs, and we can provide a copy of the certificate with your order or upon request. It's standard for our exports to Europe and other regulated markets.
Lead time is usually 25-30 days after order confirmation and deposit, depending on current production load. For urgent needs, we can sometimes expedite if stock is available.
Absolutely, the ES2.2-2B comes with a fan-shaped nozzle as standard, but it's compatible with most standard M22-14mm high-pressure nozzles. You can easily swap in a turbo or adjustable nozzle if needed.
The unit dimensions are 780×480×380mm, and it's packed in a sturdy export carton with foam inserts to protect the motor and pump during transit. We can also do custom packaging for bulk orders.
